Biolube Lubie 5 Emulsion Lube for Band Saws

Lubie® 5

A concentrated waterbased high-grade synthetic lubricant designed to be diluted with water. #5 is formulated to provide maximum lubrication on narrower band saws. Additionally, #5 cools and retards resin build-up along with providing outstanding rust and corrosion protection.

Lubie® 5 is commonly used as a low cost lubricant, coolant and cleaner on band saws and edgers. When diluted between 5:1 to 10:1 with water it provides similar performance to diesel fuel at a lower cost per shift and eliminates the fire hazard, odor, personal safety and environmental problems of diesel fuel.

 #5 is non flammable, non toxic and biodegradable.

 It does not contain any chemicals listed in SARA Title III, Section 313 or in OSHA 29 CFR 1910.

 #5 does not contain silicones and will not stain or discolor wood.

Band saws find #5 is most effectively applied through Biolube's Lubie® spray systems. #5 can be used in wick or drip lubrication systems.

IMPORTANT NOTE; Always add Lubie® 5 to water. (fill the tank or bucket with water then add #5)

PHYSICAL DATA Raw Material Base Synthetic Emulsion Color Amber/Clear Boiling Point 100C; 212°F Specific Gravity 1.03 Flash Point None Freeze Point 0°C; 32°F Percent Volatiles by Weight <3% Lubricity Rating 0.044 (diesel fuel=0.074) Solubility 100% Odor Mild USED ON: Gang Rip Saws by: Mereen-Johnson, SCMI, Cornell, Diehl, Brewer and Yates. Band Saws by: McDonough, Salem, Filer & Stowell, Wheiland, Brewer, Kimwood, Ferrari, Forester, West Plains, Baker, Brewco, Woodmizer and others. Guided Gang Saws: Ligna